Gutter for IRMAPENTA and IRMATER panel 

Gutter for IRMACOOP panel 

The galvanized sheet is subjected to a hot dip process and subjected to a 100% zinc bath.

This treatment guarantees greater resistance to the phenomena of oxidation and corrosion.

Profiled sheets are obtained from cold-rolled steel and have reduced thickness.

They are formed into different shapes and indicated for closing roofs and facades.

Cutout ridge for IRMAPENTA and IRMATER panel

Ridge for IRMACOOP panel

Lacquered profiled sheet for roofs and/or facades.

Low-ribbed Lacquered profiled sheet for roofs and/or facades.

Lacquered profiled sheet for roofs and/or facades.

Lacquered profiled sheet for roofs and/or facades.

Tile effect lacquered profiled sheet for roofs.

Colaborante profile PC 65 in galvanized steel sheet is a construction solution preferably used in the construction of composite slabs, capable of supporting fresh concrete, reinforcement and loads.

Covering panel in the form of traditional tile.Insulating panel composed of two profiled metal sheets, joined by an insulating core made of rigid polyurethane foam (PUR) or polyisocyanurate (PIR).

The exterior sheet paint has a textured finish for the greatest resemblance to traditional tile.

Insulating panel composed of two profiled metal sheets, joined by a rigid polyurethane (PUR) or polyisocyanurate (PIR) foam core.

The most resistant and efficient solution in 5-wave panel for roofing.

Insulating panel composed of two profiled metal sheets, joined by a rigid polyurethane (PUR) or polyisocyanurate (PIR) foam core.

Self-supporting wall or facade panel. Available with Ribbed, Micro Ribbed and Smooth outer face with hidden screw.

Insulating panel composed of two profiled metal sheets, joined by a rigid polyurethane (PUR) or polyisocyanurate (PIR) foam core.

Self-supporting wall or facade panel. Available with Ribbed, Micro Ribbed and Smooth outer face with hidden screw.

Insulating panel composed of two profiled metal sheets, joined by a rigid polyurethane (PUR) or polyisocyanurate (PIR) foam core.

Self-supporting wall or facade panel. Available with Ribbed, Micro Ribbed and Smooth outer face with hidden screw.

Insulating panel composed of two profiled metal sheets, joined by a rigid polyurethane (PUR) or polyisocyanurate (PIR) foam core.

Self-supporting wall or facade panel. Available with Ribbed, Micro Ribbed and Smooth outer face with hidden screw.

Insulating panel composed of two profiled metal sheets, joined by a rigid polyurethane (PUR) or polyisocyanurate (PIR) foam core.

Self-supporting wall or facade panel. Available with Ribbed, Micro Ribbed and Smooth outer face with hidden screw.

Insulating panel composed of two profiled metal sheets, joined by a rigid polyurethane (PUR) or polyisocyanurate (PIR) foam core.

The most resistant and efficient solution in 4-wave panel for roofing.

Insulating panel composed of two profiled metal sheets, joined by a rigid polyurethane (PUR) or polyisocyanurate (PIR) foam core.

The most resistant and efficient solution in 3-wave panel for roofing.

Profile C is used in the construction of metallic structures, especially in the support of roofs

Omega profile is used to support roofs and facade coatings.

Z-shaped galvanized profile, suitable for supporting panels and profiled sheets

Sealing plumb

Front trim for IRMACOOP panel

Front trim for IRMAPENTA and IRMATER panel

Outside corner trim  for IRMAPENTA and IRMATER panel 

Side trim for IRMACOOP panel 

Upper trim, with cutout for IRMAPENTA and IRMATER panel

Upper trim, without cutout for IRMAPENTA and IRMATER panel

Upper trim, of descent for IRMAPENTA and IRMATER panel 

Upper trim, backrest for IRMACOOP panel

Side trim, with cutout for IRMAPENTA and IRMATER panel

Upper trim, for IRMACOOP panel 

STACBOND® A2 is a non-combustible composite panel composed of two aluminium sheets and a mineral core developed to meet the highest fire classification standards.

Thanks to its exceptional mechanical properties: high rigidity, excellent flatness, impact resistance, durability and ease of maintenance together with a reaction to fire classification A2-s1, d0 (according to UNE EN 13501-1:2007), make it the ideal cladding solution for high-rise and high-occupancy buildings.

It complies with the strictest fire classification requirements, among which the following stand out:

  UNE EN 13501-1:2007 – A2-s1, d0

  NFPA 285 – PASS

  ASTM E84 – A CLASS

DESIGN+ is the aluminium composite panel specially developed by STACBOND® for signage and direct digital printing. Its technologically advanced surface composition guarantees perfect adhesion of UV inks and ensures quality, precise and long-lasting results.

Uses:

+

 Base for digital printing

+ Signage

+ Remodeling of commercial areas

+ Signage and advertising solutions

+ Design for exhibition stands

+ Space division and cladding

+ Industrial applications

STACBOND® FR panels are composed of two aluminium sheets and an inner fire retardant core of thermoplastic resins with mineral charge.

The panels have excellent mechanical properties such as: great rigidity, excellent flatness and impact resistance.

They comply with the majority of requirements for fire-resistance classification:

  UNE EN 13501-1:2007 – B-s1, d0

  PN-90/8-02867 – NRO

  NFPA 285 – PASS

  ASTM E84 – A CLASS

STACBOND® PE is a panel composed of two aluminium sheets and a thermoplastic resin core (low density polyethylene).

It is especially suitable, among others, for ventilated facades, high durability corporate image, stands and exhibitors, and multiple applications for outdoor spaces.

It complies with the following fire classification requirements:

  NF P 92-501:1995 – M1

  ASTM E84 – A CLASS